 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Have a Ventless N/gas Fire logs by SFC Mod# VFST-27VN, It Stopped working no gas
I have always left the Pilot Flame burning, I tried to use it and pilot Light is out and will not lite, I do not hear any gas noise coming out when trying to light pilot and no Gas noise when I try to hear anything coming out with logs turned on. Any Ideas. I have had the logs for about 5 years. I have cut the Gas Line OFF now
|
||||
Check out some similar questions!
The initial problem was the dryer was running but had no heat. The igniter did light and the flame ignited but only lasted for about 20 second. The drum continued to turn... I replaced the Thermostat limit because it did not ohm properly... After reinstalling new thermostat limit the dryer ran for...
Which direction do you turn the wall valve-cutoff to turn on and off the gas?
I have a Trane XL80 gas furnace. It also has a heat pump for ref. Today, the temp in our home dropped and I noticed that the furnace was not working. I opened it up, and vacuumed it out, and have no idea why it started working. All was good! However, hours later, the temp is again...
I have ventless gas logs in my fireplace. My fireplace is capped off right above them. When I'm using them, you can smell an odor that gets stronger the longer you have them on. It smells like gas fumes. I would like to fix this problem if it can be done. Any advice to alleviate this problem would...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
