Check out some similar questions!
Goodman furnace will not light, 2 flash LED
[ 5 Answers ]
Hi, my name is mo from Arizona, my Goodman Model PGB furnace would not light. Pulled out the spark ignitor, flame sensor, ckecked voltage at gas valve, pulled out fuse, all of these parts looked and checked out OK. Turned the power on and the furnace worked fine. Remembering the LED was blinking...
Goodman GMS91155DXA LED blinks 3 times
[ 6 Answers ]
First a bit of history: The furnace is almost 2 years old and worked all of last winter without any problems. Based on the information in the manual and some things I gleaned online, I replaced the pressure switch. Worked great ran all of last night and then starting this morning I get the same...
Goodman Gas Furnace - LED flashing "2" error code
[ 11 Answers ]
I have a 5 year old Goodman PGB024075-1A gas furnace. The LED is flashing a "2" error code, meaning an open end switch. I'm attempting to track down the potential causes of this error. After taking things apart, I found and removed an insect nest (the dirt clog kind) which had found its way into...
Goodman furnace constant blinking led.
[ 6 Answers ]
I have a Goodman Model # GSM100-4 furnace that has been a pain the tail. This week I went to start it up and I am getting a constant flash on the control board. I have an old, what I thought, was a good board that I swapped out. Still the same problem, constant flashing. I tried swapping the...
Goodman GMH8 heating unit - LED Led flash 4 times
[ 4 Answers ]
Hi, I have just recently bought a Goodman GMH81155CNAG gas heating furnace. I find the manual is very unhelpful as far as diagrams and explanatory. The problem that I am having is when I closed the doors for the furnace, the heat would stop and only the blower running. The LED would flash... View more questions Search
Add your answer here.
|