Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman GMN080-4 won't light! It's cold out
[ 7 Answers ]
I have Goodman gmn080-4 furnace. It won't light the ignitor, and has 3 flashing red lights which I was told was the vacuum switch, which I tested by blowing on it to verify it opens and closes. Here is the sequence.. 1. start the furnace.. 2. Transducer kicks on and runs for about 10...
Goodman GMN080 Furnace
[ 0 Answers ]
I had my preasuure switch replaced which fixed my furnace wich would not ignite. In the process the tube from the switch to the exhaut plower had a slice in it letting in air. Ironically last night I smelled a plastic odor in the house and the unit would not turn on. When I take the door off and...
Light turns on & Fan turns off automatically when a remot is installed
[ 2 Answers ]
I bought a Hunter remote separately and installed to my ceiling fan. Everything works good except the following problem. I turn on the fan & turn off the light before I go to sleep and in the middle of night the light goes on and fan turns off. This happens a few times until morning when I turn...
AC fan runs slow, but switch to heat fan runs normal
[ 3 Answers ]
The other morning I came into the house and noticed the ac was not working. I turned off the breaker to the unit for a few minutes. Then turned it back on. Went to the thermostat pushed it over to auto and the fan came on but ran very slow. I them turned it off. Then turn on the heat, the fan...
Inside fan runs, outside fan runs, but air is not cold
[ 8 Answers ]
The inside fan runs and runs, the outside fan on the compressor runs and runs, but only hot air comes out. I sprayed the outside compressor coils with the garden hose to clean them and checked the inside filter. Is there something else I could check? Thanks View more questions Search
|