Ask Experts Questions for FREE Help !
Ask

Goodman gas pack not firing

Asked Feb 28, 2008, 12:22 PM — 1 Answer
I own a Goodman Gas pack model GPG1024 that has failed 4 times in the past month. It usually goes out during the night. I find that the blower is running but no ignition is occurring. On the circuit board the LED light is flashing twice signifying the pressure switch is stuck open( I don't really know what that means or where on the unit it is located). It sometimes restarts after a couple of hours. One time I got it to restart by turning off the power at the breaker for a couple minutes and then switching the breaker back on. If anyone can offer some advice in fixing this I would appreciate it.

Bill

Search this Thread
Share |
1 Answer
hvac1000's Avatar
hvac1000 Posts: 14,539, Reputation: 2381
Heating & Air Conditioning Expert
  
#2

Feb 28, 2008, 01:05 PM


You can test or just replace the pressure switch. Look on your wiring diagram on the blower door for a location. You might also rempve the vinyl hose attached to it and blow through it to clear any obstructions that could be causing the problem.

Here is a complete manual for your furnace. It says amana but goodman makes it. Same unit.

https://www.acwholesalers.com/EasyEd...e%20manual.pdf
Helpful  (1)
Not your question? Ask your question View similar questions
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting
 

Undo
Redo
  
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

Goodman Gas pack won't ignite [ 1 Answers ]

I have a Goodman Gas pack, model # GPG10300701A, the exhaust bloewr on the side will come on as usual but the unit will not ignite. Usually when it comes on it will tick tick ignite, but I am not getting the spark(tick), its like there is no attempt to ignite. I keep seeing quotes about LED blink...

Gas pack, heat not working [ 1 Answers ]

The unit is blowing air but its cold,just went out all of a sudden,its like the fan is running and air is coming out of the vents, but is cold air, what's wrong with my system?

Need for new air ducts with hi eff gas pack? [ 5 Answers ]

I am installing a new hi efficiency gas pack HA/C system in a 45 year old brick rancher with conventional galvanized ductwork in the crawl space, returns uninsulated. Contractor says I also need all new flexible ducts, rather than added insulation to the returns. Is that necessary? Code...

No Auto Fan on Carrier Gas-Pack [ 1 Answers ]

I have a Carrier gas-pack Heating/Airconditioning system (about 12 years old). A few weeks ago I noticed the heating cycle was not working. I ran some checks to determine the cause and discovered that the main circulation fan was never coming on when the fan was set to the "Auto" position. The gas...

View more Heating & Air Conditioning questions Search