 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman Air Furnace - Diagnostic LED is Flashing One Time
The owner manual says this flashing means the furnace is in a lockout mode. I tried to shut down the power to the furnace for about 5 minutes and started again as suggested. But the blower fan comes on and runs for about 30 seconds and nothing happens. This continues for another couple of times and then a complete halt to operations. Can anyone assist with this problem?
|
||||
Check out some similar questions!
In just the past couple day my heat wasn't heating the house. I opened the door and there is a red light flashing 3 times and the ignitor lights but only cold air comes out. The paper on the front of the furnace says that 3 flashed means the polarity is twinned. (or something like that) what do I...
My furnace does not blow out any heat but only cold air blows out.. trane XB90 and the diagnostic LED light is flashing 4 times... please help we are cold.. the code for 4 times flahinf light says open limit device.
I have a 5 year old Goodman PGB024075-1A gas furnace. The LED is flashing a "2" error code, meaning an open end switch. I'm attempting to track down the potential causes of this error. After taking things apart, I found and removed an insect nest (the dirt clog kind) which had found its way into...
The owner manual says this flashing means the furnace is in a lockout mode. I tried to shut down the power to the furnace for about 5 minutes and started again as suggested. But the blower fan comes on and runs for about 30 seconds and nothing happens. This continues for another couple of times...
Hi, I have just recently bought a Goodman GMH81155CNAG gas heating furnace. I find the manual is very unhelpful as far as diagrams and explanatory. The problem that I am having is when I closed the doors for the furnace, the heat would stop and only the blower running. The LED would flash...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
