Ask Experts Questions for FREE Help !
Ask
    bronarlie's Avatar
    bronarlie Posts: 3, Reputation: 1
    New Member
     
    #1

    Dec 25, 2007, 10:18 AM
    Gas valve will not open on intertherm furnace blower is stuck
    Intertherm furnace pilot is lit but burner will not I have 24 volts at valve
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
     
    #2

    Dec 25, 2007, 10:23 AM
    Has the furnace ran this year or is this the first time ?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #3

    Dec 25, 2007, 10:35 AM
    Make sure the rocker switch if so equipted is on heat.
    Make sure thermostat is on heat and turned up.
    On many mobile home furnaces there is a small button in the center of the high limit control which on most furnaces is located on the left side of the blower near the back on most units if it is downflow style. Push the button to reset.
    bronarlie's Avatar
    bronarlie Posts: 3, Reputation: 1
    New Member
     
    #4

    Dec 25, 2007, 11:33 AM
    Quote Originally Posted by bronarlie
    Intertherm furnace pilot is lit but burner will not i have 24 volts at valve
    Sorry about the inapppropiate post first time user will try to do better. Fur is about 74 model intertherm high limit has no reset furn has been used this year worked fine till yester day
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #5

    Dec 25, 2007, 05:03 PM
    Start by tracing the 24 volt circuit from the beginning at the transformer through the components of the furnace. When the voltage stops you have found your defective part.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Blower on Intertherm Furnace [ 6 Answers ]

This is an older furnace.It works fine sometimes! I raised the tstat and nothing happened, I pushed the fan switch from auto to on and it worked-back to auto and it didn't work. When I checked the breakers and flipped them off and back on the blower started.Any idea where the problem may be? ...

Intertherm Furnace blower will not shut off [ 1 Answers ]

I have a Intertherm Furnace I live in a mobil home. The appliance Number is F000829379 We tuned it on for the first time this winter and it made some noises. The heat works fine but the blower motor comes on the minute you turn on the furnace and won't shut off. It is no longer making any...

Stuck blower relay in furnace [ 1 Answers ]

How do I fix a stuck blower relay in my furnace or air handler?


View more questions Search