my wife and i are just moving into a big old house. it has cast iron radiators on the 1st and 2nd floor which i have already filled and bled.
my question is, should i have lit the furnace/boiler (which looks very old) before i filled the radiators.
secondly, i have found the pilot knob, but there is no ignitor, i'm guessing i have to light it with a match/lighter, but where.
and thirdly, what is the tank at the top of the house above one of the radiators, it overflowed with water when i was filling the radiators. made a huge mess

hvac1000

Wow you have a old design system. It was originally designed by one of the DEAD MEN. This is no joke since all the guys that did these are dead and I am directing you to a web site that might be able to help you with all your questions. There is a great group of people to help you there. I have known Dan Holohan for years and the site I am sending you to is his.


Go here for your boiler help. Post your question on The MAIN WALL

Heating Help

KC13

I'm calling Smithsonian...sounds like one that was originally supplied by a cistern, then connected to a city water supply. Yikes!