Ask Experts Questions for FREE Help !
Ask
    jsjones01's Avatar
    jsjones01 Posts: 18, Reputation: 1
    New Member
     
    #1

    Feb 3, 2008, 11:05 AM
    Finding discontinued furnace part-Wesco
    I need to replace a non-functioning heating element in my 1980 Wesco electric furnace. I understand Wesco is no longer in business. Is there another manufacturer's part that will fit? The furnace is a 20kw forced air electric furnace.
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
     
    #2

    Feb 3, 2008, 11:36 AM
    There are after market kits that you can buy to restring your electric heater, ask your local hvac dealer if he can help you with this, good luck, Mike

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing ducting on Wesco electric furnace [ 6 Answers ]

I just found this site! Hopefully someone can guide me. I just bought a small old house - 1 story. It has a Wesco electric furnace, mfg date 12/27/1980. There are cold air return ducts in every room except bath, located at the bottom of the walls near the floor. The heat vents are located in...

Furnace Cleaning and Part Replacaement $500 - Repairman Cheating Us? [ 4 Answers ]

I don't know the make or model of my furnace because it's under the house, in the crawlspace and my husband is too lazy to go look. :mad: I deducted it's electric because we've never gotten a single gas bill, ever. It has recently started blowing cold air when the theromstat is anywhere near 70...

Finding part number for a coleman gas heater relay [ 1 Answers ]

I have a Coleman Evon gas central heating system DGAT070BDC, inside the standard blend air II 7681-8191 is a relay that is bad. I changed the relay, it was no longer being made, with what a sales person said was a suitable substitute. Where can I find the correct part number for this relay

WESCO UEM,allways on now [ 1 Answers ]

I have a WESCO uem 20kw electric furnace, about 25 yrs old, It had a single temp stat first then a setback stat was installed, with a box added to the furnace controls, the set back stat failed after a few years so I put the original single temp stat back and it worked for years now, a while back...


View more questions Search