 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fasco inducer motor pauses after 5- 8 seconds?
A Lennox 67k0401 combustion inducer motor was recently replaced with a Fasco A163 motor.
After the inducer motor starts. There is a pause about 5- 8 seconds then it runs OK. Is The motor defective? What's causing this? |
||||
Check out some similar questions!
What is a inducer motor
My 1997 Nordyne/Miller furnace Model G5RC-060C-12, G5R9606-01232 stopped working and signaled 2 red-blinking lights--pressure switch open. I checked tubing for kinks and blockage-none found. I cleaned condensate tank and re-filled with water. Air filter is new. I shut down furnace. Next morning...
There are two plugs side by side at the top. The top one on the left side has a yellow cap and the right side is uncapped. The one plug on the bottom has a yellow cap. Should they all be capped?
What is the purpose of the plastic “condensate drain plugs” on the Fasco D728 furnace blower motor? I needed a replacement for a GE motor 5KCP39PGP932AS 3/4HP for my American Standard Furance . On "Ask A Question", I found the reply from “HVAC1000” to “rtlalonde” that had a hyperlink to the...
I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
