 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ducane furnace LED 6 + 4?
Have a 7 year old Ducane furnace that turns off before getting to the desired temperature and the HEAT cycle is still showing on the thermostat. It only does this when I ask it to go up around 2 degrees. The LED is giving a 6 + 4 reading and I have the manual but don't know if I can try to fix this myself. Any thoughts are greatly appreciated!
|
||||
Check out some similar questions!
I have a ducane heater I been using it for about 7 years now with no trouble, This year the batteries went dead in the thermostat I changed them about 1 month later when I needed the heater, went to turn the heater on and it did not work, I checked the LED Light is red blinking 3 times, any idea...
How do I close the pressure switch on a ducane furnace?
A post from last month: AC works great - no problems. When switching over to Heat there is nothing; the circit board on the heater is getting power but nothing is turing on. The Honeywell Tstat is showing "HEAT ON" Trouble Shooting so far: Installed new 5 wire from the Tstat to the Heater/AC...
Where exactly is the filter on a Ducane Gas Furnace
I have a ducane furnace model cmpe100u4b that is not always igniting. Led will read normal then trip to a code call for heat (fast heartbeat) while the furnace clicks into and throughout its heat cycle. Any ideas (I already had to change the fan limit switch and inducer motor).
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
