Add your answer here.
Check out some similar questions!
Replace copper with flex-tubing under k-sink, replace faucet [ 13 Answers ]
I need a new faucet in the kitchen. Old lines are copper and sweated in. Can a novice do-it-yourselfer change the copper lines to flex-steel, and put in a new faucet, or do we need a plumber? We are willing to learn.. Where can I find detailed information on how to do it? Step by step?
How do I replace a 30 amp breaker with a 20 amp breaker? Must I replace the wiring? [ 15 Answers ]
I have purchased a GE built-in oven to replace the 60 year old oven that was installed when the house was built. The original oven uses a 30 amp breaker. The salesperson told me I must change the breaker to a 20 amp to accommodate the new oven, but he's unsure whether the wiring must be changed as...
HOT plenum causes short cyle ? [ 1 Answers ]
System ( +25 yrs ) is short cycling. Sound at cold air returns closest to furnace sounds like someone sucking for air ( my Dad had COPD and it sounds like him.) Contractor observed: Plenum super hot on the blower side; plenum much cooler on side nearer to panel. Blower motor dirty....
Drainage Plenum for new plumbing [ 14 Answers ]
Is it sufficient to have a single 4 inch vent for a bath, a toilet and a sink draining into the sewer line from the main floor of our house to the basement sewer stack and is the placement of the vent important in the plenum (see web page: http://web.mac.com/pughimag2/iWeb/Site/Library.html
Plenum EMT Bushings? [ 3 Answers ]
I'm installing a wireless access point in a commercial environment on a drop ceiling. The space above the drop ceiling is plenum. The data jack for the access point is installed in an electrical box through a ceiling tile supported by a rod snapped onto the ceiling grid. I want to have the data...
View more Heating & Air Conditioning questions Search