Ask Experts Questions for FREE Help !
Ask
    shawtboxxx's Avatar
    shawtboxxx Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2006, 01:41 PM
    Day & Night Central Heating Unit not responding.
    Good afternoon all,
    I have a problem with my Day & Night Central Heating Unit. Last night it just would not kick on the heat. No matter how high I turned the thermostat up, it still would not kick on. I removed the front panel and the pilot is still lit. It maybe the thermostat, I'm not sure. Sleeping in a cold house sucks, so any advise anyone can offer will be greatly appreciated.

    Thanks,
    Frost Bit Bob
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Nov 20, 2006, 03:48 PM
    How old? What's the efficiency? How many wires go to the gas valve? Is there a printed circuit board in the furnace?
    shawtboxxx's Avatar
    shawtboxxx Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 21, 2006, 09:15 AM
    It's like a '69-'70 model. It's a single pole, two wires (one red, one white). There is not a printed circuit board. I changed the thermostat but nothing happened.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #4

    Nov 21, 2006, 02:57 PM
    Is the pilot lit, or is it self lighting?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Central Air & Heating [ 7 Answers ]

Good Day, I recently changed my thermostat from a White Rogers to a Hunter programmable model 44260. I connected the system myself and now realize that the heat is not coming out of the vents. The fan is blowing but cool air. I have six wires coming out of the wall plus a jumper on the thermostat....

Day & Night Unit on the BLINK [ 4 Answers ]

I changed my filter in my central heating system and when I replaced the front the fan motor started to run. The thermostat was in the off position. I removed the front cover and replaced it again and the fan continued to run. The pilot light would not come on. It is a week later and we tried all...

Day & Night forced air heater keeps blowing cold air [ 1 Answers ]

Yesterday my heater was working as normal. Today I replaced the filter in my Day & Night forced air heater. Later I bumped my thermostat when walking by it, but I'm not certain that this caused the problem. My heater turned on and blew hot air. I turned it all the way down, but the fan...

Day & night creams? [ 1 Answers ]

Have you found any that are really good? I recently tried Avon and it was very smelly once on. Any suggestions?

70's Day and Night Gas Furnace Common wire? [ 2 Answers ]

Hi- I have a furnace that I need a common wire to hook up A new thermostat that req's a common wire- The Company that originally made the furnace, BDP - merged w/ Carrier I think- I have a Red and Blue coming out of the top of the transformer And black & white @ the bottom - 115v looks...

View more questions Search