Ask Experts Questions for FREE Help !
Ask
    krootpentwater's Avatar
    krootpentwater Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 6, 2010, 07:43 PM
    Concord furnace error code 3
    Concord 90 furnace 3 flashes LED error code... left the house for 3 hours, came back, no heat

Check out some similar questions!

Carrier furnace error code 33 [ 3 Answers ]

I have a Carrier furnace that displays error code '33'. Carrier only provides the answer to service personnel. What does this code mean as my furnace keeps going out? -sincerely, getting cold.

Twinning error code (but only one furnace) [ 12 Answers ]

Hi, I just purchased a new control board and the istallation "seemed" very straight forward, i.e. hooking up the various wires from the old board to the new one. However, all I have been able to accomplish is to get a twinning error code, i.e. a rapid red blinking of the diagnostic light. Any...

Carrier Furnace error code #42 [ 3 Answers ]

Hi, I have a Carrier Furnace model #58SXB080G6 Which is flashing the error code #42. Can anyone tell me what that is and how to fix it?

Bryant furnace error code 31 [ 3 Answers ]

I have a Bryant 350MAV048100 furnace. It runs for 15 minutes, cycles off and then cycles on and shows an error code 31. I've cleaned out the intake /exhaust lines, but still have the problem.

Concord 80 plus furnace flashing error code 6 [ 1 Answers ]

Hi, I have a Concord 80 plus furnace that lights and burns normally. The burners will kick on several times. After the cycle it shuts off and flashes error code six, system lockout. If I shut the power off it will repeat the cycle and shut down again. When I turn the power on the blower kicks on...


View more questions Search
 

Add your answer here.