Ask Experts Questions for FREE Help !
Ask
    n8cal's Avatar
    n8cal Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 17, 2006, 11:31 AM
    Coleman gas furnace
    I was having problems with my gas furnace. I replaced the ignitor which failed but it seems the ignition control may be locked out. Can they be unlocked or do they have to be replaced?I notice there is no power coming out of the ignition module to fire the ignitor. Any thoughts would be appreciated. n8
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #2

    Dec 17, 2006, 02:41 PM
    Simply turning the power off and on resets the furnace lockout status. There is something else going on. Check pressure switch and foor bad connections to the ignitor.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric Coleman Mobile home furnace [ 6 Answers ]

The blower fan keeps running and will stop until the breaker is shut off for a while. It may run fine through its complete cycles for a day or two, but will do it again! The furnace hasn't been used for about 4 years. What needs fixed or replaced, and where do I find these parts? The trailer was...

Coleman gas furnace trouble [ 6 Answers ]

Coleman gas funace, model #7680C856 for mobile home worked great last year but since cold season hit, can't keep home warm (especially at night where it has been as low as 50 degrees). Thought it might be the thermostat so replaced that with new one but same thing. Thermostat clicks, burners...

Coleman gas furnace won't stay on [ 3 Answers ]

Coleman gas furnace Model 7665-856, about 25 years old. Regulator and thermalcoupling and thermostat all replaced within last two or three years. Problem appears same as "THISAWAY" asked about 11/25/06. Furnace blows for about 45 seconds then shuts off. Burner appears to stay on when blower stops....

Coleman Furnace [ 1 Answers ]

Burner will not stay light. Fan comes on, ign. Box activates, ign. Comes on, gas sol. Opens, Flame for 2-3 sec. ign. Box de-activates and drops gas sol. Ignitor after hot reads 40 ohms, cooling off as high as 170 ohm. Replaced: Ignitor box Gas sol. Blower PC Furnace was flooded with...

Coleman Furnace Fan [ 1 Answers ]

I shut off furnace last spring by shutting off gas and pulling breaker. Turn the breaker back on and the blower runs with the thermo turned to off. I've tried to fire up furnace anyhow but it won't start. Only way to shut blower off is by turning off breaker. Was working fine the last time I had it...


View more questions Search