Ask Experts Questions for FREE Help !
Ask
    gidget1964's Avatar
    gidget1964 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 19, 2008, 06:16 PM
    Coleman Evcon electric furnace
    How do I know or rather how can I check to see if the repairman cut off one of the heating elements and where are they located?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Jan 19, 2008, 07:50 PM
    Look at the elments for disconnected wire. It is located near the top op the air handler

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman Evcon Electric Heat/Air unit filter placement [ 7 Answers ]

We live in a rented mobile home in Texas; the landlord requires us to change filters once a month in the heat/air unit, which is a Coleman Evcon. (There is no model number visible.) The filters were sitting tilted along the side, inside the case, when we moved in. We have lived here over a year and...

Coleman evcon furnace [ 5 Answers ]

My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...

Coleman Evcon electric furnace [ 2 Answers ]

I have a Coleman Evcon electric furnace in a mobile home I rent. Recently a wire had burned off which caused it to produce no heat. After they sent a repair man to work on it I now seem to not have as much air force coming out of the registers. Also it takes 20 minutes to raise the temperature one...

Blower during furnace operation on electric Coleman Evcon [ 2 Answers ]

I just installed a programmable thermostat for an electric Coleman Evcon furnace. Now when the furnace comes on the blower also comes on. Sometimes the blower goes off a minute or so before the furnace stops. It never did this before- in fact I didn't even know there was a blower. Do I need to...

Centrifugal- Won't come on Coleman-Evcon Furnace- [ 2 Answers ]

Hi, Just found your site today-yipee! I have a problem with my Coleman-Evcon furnace (it has had A/C added)-just bought the house this year, but previous occupants said all was working before. When I turn on the heat on the thermostat, I get a code 3 readout, "Centrifugal Swithch Open"; I had...


View more questions Search