Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Iducer motor fail on Carrier 58MVP furnace
[ 7 Answers ]
The variable speed inducer motor does not start at all. I have replaced the motor and control board. Is there a reset or programming that has to be done? Is there something else that could be causing this? I ran the equipment test mode and inducer failed to reach speed is the only error I get.
Carrier WeatherMaker 8000vs electric ignitor element burning into after 1 day use
[ 1 Answers ]
Carrier WeatherMaker 8000vs - Electric ignitor burnt into Friday afternoon, replaced with new one Saturday, worked for 1 day and burnt into this morning. Need cause, LED blinks 34, I have read the troubleshooter guide, but don't understand. Please help. Thanks Robyn
Location of Ignitor in Carrier Furnace
[ 2 Answers ]
This is my first winter in a new home... furnace is a Carrier Weathermaker 8000 58WAV from 1993. A couple of days ago my ignitor went bad, I bought a new ignitor for this model but to my surprise when I opened the unit I found that the bad ignitor (which was not the same as the correct...
Carrier 58MVP Blower won't come on.
[ 5 Answers ]
Hello all, The blower on my Central AC will not come on. The display shows a code 41. It worked fine forever, but now fails to run the fan in heat, AC or even with just the fan on selection. Any ideas? Thanks!
Carrier Ignition Lockout Code & Ignitor Problem
[ 3 Answers ]
The code I'm getting is 14 for ignition lockout, will reset in 3 hrs. The furnace tries to ignite 3 or 4 times and then the code trips and shuts the furnace down. I usually just flip the manual switch to get it going again but if I'm not home to pay attention or if we're asleep the house will... View more questions Search
|