Changed the batteries in my thermostat and now it doesn't work

sgoen1965 Posts: 1, Reputation: 1

New Member

Apr 21, 2013, 11:35 AM

Changed the batteries in my thermostat and now it doesn't work

I changed the batteries in my thermostat and now it has no power at all. Is there some sort of reset button?

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Apr 21, 2013, 04:48 PM

Batteries put back correctly?

Add your answer here.

Check out some similar questions!

Changed thermostat and Comfortmaker RPJ II Furnace won't work now... [ 0 Answers ]

The control board is getting power but I do not get any readings from the red wire coming out of the board to the thermostat. Is my control board bad, or is it a fuse?

Maple chase 9600 thermostat, low battery. Changed batteries, no display at all [ 1 Answers ]

Display screen stays blank, even reset breakers and reset button on thermostat, still blank with new batteries installed

Heat doesn't come on when thermostat calls for heat, changed thermostat and switch [ 0 Answers ]

Changed thermostat and switch reset wires and worked for the weekend, until last night didn't turn on and I had to press the reset button what else could it be?

Ceiling Fan Remote Control doesn't work after I changed the batteries [ 4 Answers ]

I just changed the batteries in my Hampton Bay ceiling fan. Now the fan is running and won't respond to the remote control. The remote seems to be working properly. What do I need to do to get the fan and the remote to sync up once again?

Changed thermostat now heater won't work [ 1 Answers ]

We changed a white rodgers thermostat out to a honewll round and now in order for the heater to come on you must first turn the fan to the "on" position. The heater will come on but won't turn the fan on so the safety sensors turn the heater off when there is no air flow. I was told that we got the...