Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier furnace 58rav115-16 blower runs but furnace will not ignite
[ 0 Answers ]
I have a 58rav115-16 caarrier unit. Lst week I replaced a suspected bad draft limit switch(code31) ran fine after. This morning I got up and the blower was running but it would not ignite. I switched to emergency heat and received a code31. I bypassed the draft switch and was able to get the them....
Carrier furnace will not ignite
[ 0 Answers ]
Cleaned the flame sensor. Replaced the ignitor! Replaced the gas valve. With the old gas valve, it worked some of the time, but you could see it had problems igniting. It would ignite with 1 out 5 tries. After replacing the gas valve, it does not ignite period. When it does ignite, the gas...
Carrier furnace won't ignite
[ 1 Answers ]
I have a carrier Day & Night furnace model # 394JAZ0480800AAFA, It won't ignite. When I turn on the furnace the igniter starts but won't light the pilot. If I use a match it will light the pilot. What part needs to be replaced? Where can I find that part number and where can I buy the part?
Carrier furnace will not ignite
[ 2 Answers ]
Safety cutoff switch on air from small fan draft inducer fan I think high temp bimetal disk? Trips when its bypassed using aligator ciips furnace works. Is the switch just weak tripping when it shouldn't The furnace will work fine for a couple of weeks then not ignite because this switch is...
Carrier furnace won't ignite
[ 1 Answers ]
I own a carrier furnace Infinity installed in 1994 model p21559 B.V. the ignitor does not ignite and the blower does not blow. The thermostat reads hold -AC .This furnace has been a problem since it has been installed. View more questions Search
|