 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier Furnace will not ignite
Cleaned the flame sensor. Replaced the ignitor! Replaced the gas valve. With the old gas valve, it worked some of the time, but you could see it had problems igniting. It would ignite with 1 out 5 tries. After replacing the gas valve, it does not ignite period. When it does ignite, the gas chamber where the ignitor is would be slow to fire up. The far 2 chamber would ignite first and then the third would ignite. The furnace works great when it starts up. Any ideas?
|
||||
Check out some similar questions!
The burners to my Day & Night Gas furnace will not ignite. I hear a clicking noise and pilot turns on but the burners will not ignite. I can turn the thermostat to on and the blower works??
I have a concord 80 plus gas furnace, the system tries to ignite, but does not. The system has a spark ignition system on it. The service repairman replaced the circuit board last December, but we seem to be having the same problem once again this December. Is there something wrong with the...
I have had a couple people look at my furnace and can't afford to pay the Bryant team! I replaced blower motor 2 years ago, furnace seems to run great once on, but when it kicks on sometimes I smell gas before and after cycles! I had to replace the inducer cooling fan, 3 weeks ago, now the smell...
I have an Inter-City furnace and I installed an electronic thermostat. The furnace pilot will ignite, but when I turn the gas valve from pilot to (on) and turn the thermostat to ( heat), the furnace doesn't come on.
:confused: I just bought this goodman furnace Followed the directions to convert it to lp gas. Put it on so the heat will kick on. The blower blows and the ignitor glows but doesn't ignite the flame. Now I lit it with a torch it lights but it is a horrible yellow flame. Does anybody have any...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
