Ask Experts Questions for FREE Help !
Ask
    teawan's Avatar
    teawan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2007, 08:40 AM
    Carrier 58GS100-2 201BB
    The blower motor (which is brand new 1/2hp) will not start unless I turn it by hand.
    It appears to be the capacitor, but I have no idea what the capacitor looks like or where it is located. Can anyone help please. Much thanks
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Oct 15, 2007, 09:39 AM
    Here are some pix of cap's. Follow the 2 brown wires from the motor to the capacitor. If this is an ECM motor you have a whole different problem.
    https://www.askmehelpdesk.com/heatin...tml#post269065
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier [ 4 Answers ]

I have had same problem with Carrier furnace - don't know model # at this point. After about 20 hours of working, furnace won't work unless blower switch is shut off/on. Or, open door/close it. I was informed by similar help site to replace the surfface heat ignitor, which can break as often as a...

Carrier thermostat [ 4 Answers ]

Just this week thermostat was not on, flipped circuit(not blown) thermostat went on. Has happened 3 more times today. House is one and half years old. Took cover off checked connections. What is causing this?

View more questions Search