 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
a/c keeps tripin the breaker when it tries to cycle
My a/c run great but when it sarts to heat up outside about 10am it trips the breaker when it tries to cycle. I reset the breaker and it runs good and cools good unitl it goes to cycle again and it trips again. I have replaced the breaker , replaced the run cap ,and washed the coils. Only does this between 10am-7pm other than that it runs great. It a 4 ton train unit. Thanks. I live in Texas and its hot as hell
|
||||
Check out some similar questions!
My a/c will run great but when it gets hot outside and the a/c goes to cycle it trips the breaker. When this happens I can turn the. Thermostat off and reset the breaker come int the thermostat back on and a/c will run great until it goes to cycle then trips the breaker again. Any other time it...
Thermostat indicates that heater should be turning on. Circuit breaker has power, tested it. Cycling one of two circuit breakers starts Coleman Electric heater operation. Sometimes this will cause heater to work for days. Then out of the blue the house gets cold and the breaker has to be cycled...
We have had this problem with the circuit going out for a long time. The dishwasher is kitchenaid KUD1230B. The breaker is rated for 20 amp the unit says it draws max 12.5. When you get to the rinse and hold cycle it throws the breaker. Not sure if it is the unit or electric supply. And way to...
My Kenmore dishwasher will only start a cycle after I have reset the dishwater by flipping the breaker, what can I do to fix it?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
