Ask Experts Questions for FREE Help !
Ask
    debbieadamson's Avatar
    debbieadamson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 16, 2007, 07:17 AM
    Bryant rollout switch
    I've looked for the rollout switch and can't seem to find it or knows what it looks like I've read some of the ?'s and having the same problem it is blinking 3/3 so I changed the filter etc etc BUT WHERE IS THE ROLLOUT SWITHCH am I just blind any help
    JackT's Avatar
    JackT Posts: 260, Reputation: 19
    Full Member
    		  
    #2

    Apr 16, 2007, 06:21 PM
    Why do you need to find the rollout switch? What kind make/model unit do you have? If you don't know what it looks like I wouldn't recommend you mess with it. Gas units can be dangerous and should only be serviced by trained service technicians. Any poorly operating gas furnace could produce deadly carbon monoxide gas.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Apr 16, 2007, 08:00 PM
    If you think a rollout switch is causing you problems it is probably because the rollout switch is doing what it is suppose to do in the first place and that is to turn your furnace off the flame rolls out the front of the burners. And like JackT said about this needs the service of a person that is knowledgeable in bad heat exchangers.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Brayant 80t furnace, 'Limit or flame rollout switch is open"? [ 1 Answers ]

HI, I am new here and am having a furnace problem. As a new homeowner I would like to take a look at this myself before just grabbing the phone books. I have a Bryant 80t furnace. Built in 2000 and has been serviced every other year. Unit is clean and in good shape. Woke up to a cold house and...

Pressure Switch for Bryant furance [ 1 Answers ]

Can someone tell me how much a pressure switch for a Bryant furance should cost and is it difficult to install?

Bryant Burner [ 3 Answers ]

I have a valve on a Bryant Burner for an old gas furnace. There seems to be a problem with the gas valve that feeds the burner. Are 40 year old valves available? Thank you. Dennis

Converting pull switch lights to wall switch [ 3 Answers ]

I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...

Furnace Rollout [ 1 Answers ]

I recently had a furnace tune-up. The furnace is a natural gas forced air unit that is approximately 20 years old and has not been maintained over the past 5 years. The technician informed me that the unit has significant rollout and recommended a new unit. What are the dangers of rollout? Is...

View more questions Search