Ask Experts Questions for FREE Help !
Ask
    mjoseph44141's Avatar
    mjoseph44141 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2009, 08:15 AM
    Bryant furnace error code 31
    I have a Bryant 350MAV048100 furnace. It runs for 15 minutes, cycles off and then cycles on and shows an error code 31. I've cleaned out the intake /exhaust lines, but still have the problem.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Nov 29, 2009, 08:26 AM

    Did you try cleaning the drain? The fault codes should be listed on the back of the door.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #3

    Nov 29, 2009, 09:07 AM
    Find codes here, page 15. Follow table to check possibilities. 31 = pressure switch did not close or re-opened.
    Attached Images
  1. File Type: pdf sm350aav-02.pdf (742.3 KB, 1568 views)
    2. ride_z71's Avatar
    ride_z71 Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Feb 9, 2011, 10:15 AM
    I have a Bryant 90 Plus 350 MAV and it recently started not completing the heating cycle. It would shut down premature with an error code 31, but then would turn back on in a few hours. Reading this post caused me to check my drain lines and there I found water was backed up due to the collection box being clogged from 13 years of neglect. Seems like cleaning it did the trick, the tempature, as well as the looks I was getting from the wifey are both much WARMER!

    Thanks Guys!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace model 376cav, error code 24. [ 7 Answers ]

I am getting error code 24 on my bryant furnace. Could someone please help me by letting me know what the code is, and how to fix it? I was trying to install a new thermostat and might have got wires crossed. Thanks

Bryant Plus 80 Error code 33 [ 3 Answers ]

Hello! I'm new on here so bear with me. I found a similuar post on the Bryant 80 but I believe I have a different model... not sure how much that matters. The only model number I could find on the unit was CK5AXA036017AAAA The Error code is 33 Limit or flame roll out switch is open. The furnace...

Bryant plus 80t error code 31 [ 7 Answers ]

Ok, the furnace stopped working this morning. Need some help. The flame goes on, but turns off after a minute. The LED flashing code on the motherboard says 3-1 (31 - which is the high heat pressure switch -- also says to refer to error code 32 which is the low heat pressure switch). I turned the...

Bryant 352MAV and error code 32 [ 49 Answers ]

Our furnace worked last night but this AM it didn't. It's a 3 year old Bryant 352MAV, installed horizontally. It's giving error 32. I've spent much of the day working with it. I'm more than handy but don't really know much about hvac. I found that the idiots that installed it (and who are now...

Bryant plus 80 error code 31 [ 1 Answers ]

Bryant Plus 80 furnace - Error code 31 What are the corrective measures to put this furnace back to producing heat? There is power, the fan works but there is no heat. We lost power recently but it worked after that. Last evening there were high winds which were indicated on the code...

View more questions Search