 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 90 furnace only blows with fan on?
Bryant 90 furnace will ignite, heat furnace, but does not kick on the blower when on AUTO. If I put it on ON position, it will run continually. There is also a smell of bruning wires coming out of the vents. The air flow is not very strong coming out of the vents, it will barely blow a piece of paper away from venst. The mail box of the furnace will heat up to almost 120 degrees, hot to touch, yet not blowing enough to heat house. I changed batteries in the thermostat and checked and tested all fuses, all wires are connected in the unit. The small fan, about 8-10" moves and the motor turns without making any noises. What could be wrong?
|
||||
Check out some similar questions!
My bryant furnace blows cold air
[ 0 Answers ]
I turned my bryant heating system on and it blows cold air, is there a pilot I got to light
Bryant 383KAV furnace won't ignite, fan blows cold air.
[ 1 Answers ]
First we replaced the thermostat. Then we replaced the ingiter. Still only blows cold air? Any one know what the problem is? :confused
Bryant gas furnace runs blows no heat
[ 1 Answers ]
Furnace is running, but no heat is blowing into our house. It smells like a candle that has just been put out. The vent pipe that goes to the chimney is hot to the touch. What do I need to do?
Bryant gas furnace runs blows no heat
[ 1 Answers ]
Furnace is running, but no heat is blowing into our house. It smells like a candle that has just been put out. The vent pipe that goes to the chimney is hot to the touch. What do I need to do? Ok, this started this morning. It seemed cold in the house, turned up the furnace and it didn't make...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
