Ask Experts Questions for FREE Help !
Ask
    sabres07's Avatar
    sabres07 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 16, 2008, 10:39 PM
    Bryant 373LAV Horizontal Gas Furnace will not light
    Hello All,

    My Bryant gas furnace will not light. It will go through the motions like it wants to run but it never lights, nor does the fan run on the auto setting; only on the manual setting.

    It is also on some sort of time delay; if the thermostat is set higher than room temp. the furnace will begin to run like it normally would but the burner never lights. It seems to make a few attempts to light during this period -I hear electrical clicking- but it is unsuccessful and then shuts itself off. Afterwards, it is inactive for about an hour.

    There is also an led sequence which appears to be 1 short lighting with a short pause and then 4 more short lightings.

    Does this sound like the igniter is done for? Any insight would be greatly appreciated.

    Thank you,

    TJ
    therinnaiguy's Avatar
    therinnaiguy Posts: 153, Reputation: 5
    Junior Member
    		  
    #2

    Jan 17, 2008, 01:59 PM
    I would start with the igniter, they are prone to fail.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant 373LAV trouble codes [ 2 Answers ]

My Bryant 373LAV appears locked out. The trouble code is 3 short and 1 long. The trouble code sticker is missing from the blower door. Can anyone identify the code's meaning?

Sears Fifteen Horizontal Furnace [ 4 Answers ]

Hello, I have a Sears Fifteen Horizontal furnace that will come on and then go out before the proper temperature is achieved. The fan will continue to run but the burner will not re-light until I reset it at the thermostat. Also, I had the blower motor replaced several years ago and the tech...

Horizontal light line across center of screen [ 1 Answers ]

... this has happened several times in the past 2 days... I'll get a normal picture, then it will 'collapse' into one small horizontal line across the center of the screen. I turn the TV off, the picture returns, etc. This has happened several times. Does this mean the TV is dying? It's a Sanyo...

What are the Bryant 373LAV/376CAV Error Codes? [ 3 Answers ]

I have a Bryant 373LAV/376CAV Gas Furnace. I started having a problem with it and can't find the FLASHING LED ERROR CODES anywhere. After reading some of the answer in these forums I'm assuming the LED flashes x times short, then x times long for a 2 digit number. I'm getting a 3 short 3 long...

View more questions Search