 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower motor
I have a Coleman airhandler which is about eleven years old. I had a new Nordyne heatpump installed about a year and a half ago. It worked fine until a month ago, now the blower will only go off when the breaker is turned off. The thermostat has no effect on it, however the a/c cycles fine. Could this be a thermostat problem?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I just replaced the blower motor because the a/c guy said it was bad and was going to charge me $420 to fix it so id id it myself. I got another motor, the old one was 4 spd 960 rpms, and the new one is 3 spd with 1075 rpms, the people said it was okay to do it like that and got a new capacitor as...
My blower motor for my furnace is not spinning. I opened up the cover and asked my wife to turn on the AC. When she turned it on,the motor just made a humming sound, but the cage did not spin.When I touched the motor it was pretty hot and there was a faint burning smell. Do I need to buy a new...
THere is no air blowing when the heat is on. The furnace does come on but no air blows. If I turn the heat off and manually turn the fan on the air blows. If I leave the fan switch in the on position and turn the heat on the air stops.
I have read multiple posts about wiring for blower motors and saw one that almost answered my question. I have an old blower motor that I would like to convert to a shop air filter. I know that it is a multi-speed motor. It has 8 wire connections and are labeled as such: Power cap cap ...
View more questions Search
|
