Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Gas Furnace Blower Motor
[ 6 Answers ]
I have an old Rheem gas furnace. My fan blower motor stopped working. I had Sears order me a new one. The installer walked away, giving up because he couldn't get the old motor out of the housing. I got it out and installed the new one myself. Everything turns freely. I made the furnace turn on and...
Just repaced blower motor on gas furnace
[ 1 Answers ]
How do I adjust the blower on my gas furnace to come on after the pilot ignites, not before
Miller CMF Series 80-PG Gas Furnace Blower
[ 2 Answers ]
I think the Miller CMF Series 80-PG Gas Furnace is around 20 years old. I need to know about the ground wire to the blower motor. Does it go to the door switch or to the heat limit switch?
Blower trouble with gas furnace
[ 6 Answers ]
The blower on my gas furnace doesn't always start. The thermostat is fine and the blower spins freely. The furnace lights off fine but sometimes the blower doesn't want to start. I should mention it is a direct drive blower. (no belt). Do I need a new motor. Or could it be a faulty switch or relay...
No heat, blower runs constantly, carrier gas furnace
[ 7 Answers ]
This am we I got up the blower on my carrier series 100 gas furnace (approx 10 years old)was running and blowing out cold air. Even with the thermostat turned to off the blower runs constantly. The only way to stop the blower from running is to turn the switch on the side of the furnace to off or... View more questions Search
|