Ask Experts Questions for FREE Help !
Ask
    dagoirish1's Avatar
    dagoirish1 Posts: 4, Reputation: 1
    New Member
     
    #1

    Jun 20, 2009, 01:50 PM
    Blower in furnace does not turn on
    Gentlemen... turned air on for the 1st time this year. a/c unit outside fires up fine... but blower in furnace does not. Replaced thermostat during winter because blower would not shut off. After installation furnace worked as it should. I must have wired thermostat wrong? Thanks for any and all info!! Tony:D:confused:
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #2

    Jun 20, 2009, 01:53 PM

    Does the blower work when you turn your stat to fan on??
    dagoirish1's Avatar
    dagoirish1 Posts: 4, Reputation: 1
    New Member
     
    #3

    Jun 20, 2009, 02:00 PM
    No it does not...
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #4

    Jun 20, 2009, 02:16 PM

    Sounds like you have a bad fan relay.
    dagoirish1's Avatar
    dagoirish1 Posts: 4, Reputation: 1
    New Member
     
    #5

    Jun 20, 2009, 02:40 PM
    Josh... thanks. Question... I have 4 wires coming to thermo.. red/white/yellow and black. Black is ground? Also... fired up furnace blower kicked on as it should have/blew hot. Is there separate switches for a/c blower and heat? Ty:eek:
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #6

    Jun 20, 2009, 04:21 PM

    Yes the heat blower and the cool blower a controlled by separated things. Black is porbally fan, is it hooked to g or to c? It is common if it is hooked to b or c
    dagoirish1's Avatar
    dagoirish1 Posts: 4, Reputation: 1
    New Member
     
    #7

    Jun 20, 2009, 04:58 PM

    Thank you for your help. I have a friend who is in the business /cannot raise him on phone. It is probably something simple. Take care tony from Wisconsin

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace Blower and A/C fan do not turn on [ 4 Answers ]

I have the following equipment: - UNUS Excallibur furnace - Trane XE 1000 AC unit - Honeywell programmable thermostat (not sure of the model, but I'm sure it's old) I recently tried to fire up my AC in the house. The thermostat seems to click, but neither the furnace fan or the...

Old Gas Furnace Blower Won't Turn On [ 1 Answers ]

We have a Lennox gh6 120C Furnace, original to our house, installed in 1959. I have two issues. First - we have a switch on the side that also has outlets on it. We have never used it for this, but is it to just turn on the blower? This leads to my second issue. When that switch is off, the...

Furnace blower fan will not turn on [ 1 Answers ]

I have a comfortmaker furnace about 15 years old. When I turn the heat on it works just fine the gas comes on and the blower blows warm air into the house. When I turn the air conditioner on the compressor and outside fan come on but the blower in the furnace will not come on. I tried the fan on...

Blower for furnace won't turn on [ 2 Answers ]

I have just re-lit my pilot light for the winter. The furnace is turning on with the thermostat set, but the blower isn't. If I put the blower to manual it turns on, but not in the auto setting. What do I need to do?


View more questions Search