Beckett AFG burner electrode adjustment
Asked Dec 27, 2009, 07:45 AM
I have a WeilMclain boiler with a becket burner. It seems to run fine when warming the house to tempurature will cycle on and off with no proble.
Lately I come home and the boiler is out. I push the reset and it fires right up.
It started doing this every 4 days now it is every day.
Recently upon start up it had a hard time firing. Once the fuel ignited it sputtered and smoked. Once again after it ran it cycled on and off fine while warming the house.
I have changed the filter. Cleaned the pump screen and checked the nozzle.
I have read that agravity feed on these models could cause problem. It may be my imagination but it seems the more I have done to correct the problem the worse it has gotten.
Any help please...