Ask Experts Questions for FREE Help !
Ask
    sis7490's Avatar
    sis7490 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2009, 08:36 PM
    Becket oil furnace burner
    Westinghouse nordyne oil furnace model 04md-091a-12-fa ran out of oil, refilled oil tank and bled out. It lights runs for about ten minutes and trips out, it re starts for 3 or 4 times, runs for about 5 minutes, then locks out. I bled it some more but it doesn't get better, what could it be?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 7, 2009, 09:14 PM
    It could need a good tune up by a professional which is suggested to be done every year. OR it is possible you still have air floating around in the oil line. OR the oil filter is plugging after a short operating time and could need attention. With oil there are many possibilitys.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox Oil Burner Troubleshooting [ 10 Answers ]

HELP. I have a Lennox OF23Q3 oil burner. It is tripping out the safety button on the primary control erratically during operation. Sometimes it runs 20 minutes before tripping and sometimes only a few minutes. When it does trip the blower just constantly runs until the power is cut. I have...

Thermopride oil furnace smells oily sometimes [ 3 Answers ]

Sometimes my thermopride furnace kicks out smoke out of the front near transformer and also get smell out of register. Have tried having it cleaned but no dice.

Oil Furnace won't come on [ 1 Answers ]

We have an old Williamson Oil Furnace. I'm not sure of the age, we bought the house 2 years ago. 3 days ago, it didn't come on, when the thermostat was turned up. The reset switch worked to get it started 2 mornings in a row, but now nothing. You can hear it trying to come on when the thermostat...

Broke bleeder valve on beckett oil burner [ 1 Answers ]

Is there anyway to bleed the motor without a bleeder valve?

Becket AFG Burner Ignition [ 7 Answers ]

My burner sometimes fails to light in morning after set back thermostat calls for heat. My service man checked pump pressure 100psi+and transformer, changed nozzle and electrodes. Unit still would not fire untell transformer raised. I believe this reduced air flow, unit fired and continued to...

View more questions Search