Check out some similar questions!
Bryant Plus 80 gas furnace won't ignite burners
[ 6 Answers ]
I own a Bryant Plus 80 gas furnace. The fan will run if I set the thermostat to "Fan On" instead of "Fan Auto". But the burners will not ignite. I have followed the user manual instructions to re-start the furnace, but that didn't work. I have a gas water heater and it is heating so I know the gas...
Goodman gas furnace will not ignite
[ 8 Answers ]
I have a goodman gas unit. The igniter will glow red I can here the gas valve click and then I can hear the gas come on but it will not light. If put my finger in front of the burners I can feel the gas and I can also smell it. Can anyone help me thinks.
My gas furnace doesn't light pilot ilght come on but gas doesn't come on
[ 1 Answers ]
Gas furnace doesn't come on the fan for fresh air/exhaust and pilot light comes on but gas valve not letting gas in to burner so it doesn't light,but if I turn off power and back on three or four times it will work until house cools and need heat again
Gas wall heater will not ignite
[ 2 Answers ]
My gas wall heater will sometimes not ignite. The pilot light is lit and when I turn on the heat I hear the themostat engage. However, the heater doesn't always fire up. When it does, sometimes it turns off prematurely after a few minutes. I don't want to spend $100 on a house call if it's a simple...
Looking for inducer motor for a Arcoaire furnace Model number GNE100F14A1
[ 1 Answers ]
Do any of you have a source for Arcoaire furnace parts. I have a vent inducer motor that is making lots of noise and I can't find a supplier locally. I thought maybe the brand would be popular in your area and you might guide me to a replacement. I would like motor only but will take what I have to... View more questions Search
Add your answer here.
|