Ask Experts Questions for FREE Help !
Ask
    jendamonsmanager's Avatar
    jendamonsmanager Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 30, 2007, 10:49 AM
    Adjusted Limit Switch Now Blower Won't Turn On
    I turned on the furnace for the first time last week and the blower woudn't turn off. I did some research on this site and upon investigation the limit tab setting was set at 150 and the "on" was all the way up to the limit tab at 150 as well. The "off" was set at 50 and I think that's why the blower wounldn't stop running. So I adjusted the "on" to 110 and the "off" to 90 and now the blower won't turn on. The furnace has an auto pilot light and I can see the burners are lit but the blower doesn't ever come on. It doesn't make sense to me that lowering the "on" temperature would result in the blower not coming on, especially when it was coming on when the temperature was set higher. Any suggestions? Do I need a new limit control?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 30, 2007, 04:24 PM
    Could be you have a defective blower control. That would answer the problem you were having in the beginning when it would not turn off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem furnace blower motor won't turn on [ 2 Answers ]

My furnace blower motor will not turn on. The troubleshooting guide says to replace blower motor but the diagnostics says the Limit Switch is Open any ideas

One Switch two lights - the second light furthest away from light won't turn off [ 4 Answers ]

One Switch two lights - the second light furthest away from light won't turn off but the first one does Worked until I swopped the roses. Suspect that didn't do something right when putting them back. Up to now - left bulb out but need to get it to work now.

Limit Switch [ 2 Answers ]

I Would Just Like To Know Where It Is Located I Have A Evcon Enegry Guide Saver.heater Won't Come On Do To Limit Switch Being Open

Limit switch [ 1 Answers ]

What is a "limit switch" for a central heating unit? And is it expensive to replace?

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search