Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kenmore works just no heat
[ 9 Answers ]
Yes I have a kenmore dryer that I bought out of a classified add Model number 110.86870100 I reset the breaker and made sure it was on heat not air but it still won't work I checked to see if there was any air flow coming out of the vent there is though I don't know how much air should be coming...
Intermittent blower on a/c only, works fine with heat
[ 2 Answers ]
I have a 1997 or 98 Coleman Natural Gas Furnace with A/C. The blower works fine during the winter when I use heat. When I use the A/C, it seems that once the blower starts working for a bit on a hot day, it evetually (if on for more than 10 minutes at a time or so) starts kicking on and off while...
Gas Furnace / AC unit fan works. Heat/AC do not
[ 2 Answers ]
This winter the furnace control board in my Lennox Gas Furnace / AC unit failed and I had it replaced by a contractor. The contractor mis-wired the thermostat inputs to the board. He wired the Green (fan) wire to the C (compressor connection) board input and the C wire to the Green (fan) board...
Kenmore Dryer - No Heat - Everything else works
[ 2 Answers ]
Model number 11063932101 - The element will not heat, but the drum will rotate, interior light comes on, etc. I have checked the two circuit breakers - OK! I have done a continuity check on the heater element, thermal cut-off, thermostat and thermal fuse. All pass the continuity check. Also, I...
Blower fan works in A/C but not heat
[ 8 Answers ]
A couple of weeks ago my Lennox G20Q3E-75-1 was acting up. Gas valve was cycling when calling for heat and then once satisfied and the main burners went out the pilot light was staying lit. I thought it might be the flame sensor as far as the gas valve cycling and didn't want to tear into it so I... View more questions Search
|