AC , Furnace, and Blower not turning on w/ thermostat set to Auto or On.

hvacservicetech_07 Posts: 1,083, Reputation: 75

Ultra Member

#21

May 20, 2007, 08:09 PM

I honestly think there is a short somewhere because the breaker tripped, It may be the transformer and then again it could be a few other things, I would try and get ahold of a voltage meter and I can walk you through some things you can test, otherwise you may need to call a pro. Let me know if I can help anymore.

Add your answer here.

Check out some similar questions!

Furnace blower can not auto start [ 29 Answers ]

I have a problem with my furnace blower not starting automatically. It works good when I swiched the fan option to "ON", the furnace was burning and fan was running. However if I pick "AUTO", only the furnace burns periodicaly, and the fan totall gets stuck. I am wondering if it is a wiring...

A/C or Heat does not work w/thermostat set "on" or "auto". [ 22 Answers ]

A/C or Heat doesn't work in "on" or "auto". Fan will not come on at the "on" position either. I changed the batteries in the thermostat. I also read somewhere to disconnect the "Y" and hold it to the "R" on the thermostat for two minutes. That will tell me if the thermostat is the problem. ...

Thermostat Q - Blower Does Not Turn ON in FAN Auto Mode [ 10 Answers ]

I just installed a NOMA 7-day programmable thermostat for an electric furnace/AC system (ceiling unit). I believe the wiring (5-wire) is correct. When I set it to COOL with Fan set to AUTO, it turns on the A/C and the fan automatically. Good. But when I set it to HEAT with Fan set to AUTO,...

AC Compressor turns on, no furnace blower with new thermostat [ 3 Answers ]

I have a simple 4 wire, 1 stage cooling, 1 stage gas heat system. Over the winter I replaced my Honeywell CT3200 programmable thermostat with a Totaline Wireless Thermostat System. The receiver is model P474-1100REC. The sender is model P474-1100RF. The thermostat worked great through the...

Furnace blower cycles with Thermostat off [ 2 Answers ]

Have Goodman Furnace built 1994. Worked fine until about 3 weeks ago. It starts cycling, and the heat icon does not show on the thermostat. I turn the thermostat off, the furnace continues to blow. Last night to verify, took the thermostat off the wall (but still had the furnace plugged in and...