Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fixing Bathroom Cabinet
[ 3 Answers ]
We have the task of fixing a bathroom cabinet weighing 16lbs to a tiled, plasterboard bathroom wall. The cabinet is supported at the four corners using metal slotted holes inset into the back of the cabinet. The screw heads pass into the holes and then the cabinet is lowered a short way so That...
Under kitchen cabinet lighting
[ 1 Answers ]
I bought two sets of touch sensitive under cabinet kitchen light set put them in but one set keeps flashing then stops all together I've replaced the transformer and the touch switch but the wires in the six port connector, when you move the wires there the light go out two which one you touch ....
Kitchen cabinet lighting
[ 1 Answers ]
I've purchased hampton bay under cabinet lighting and the sets are limited to up to 200watts. If I have 2 sets can I splice the 3 setting dimmer switch to activate the 2 mutiple outlet strips?
Cabinet door swinging open
[ 2 Answers ]
Hi, Just the other day, one of the doors on one of our kitchen cabinets spontaneously started swinging open. It had never done this before - we suspect something in the house settled. None of the other doors are doing this. Now, you can't close it - it just swings back open. Any suggestions?... View more questions Search
|