Small hole in snowblower carb?

I have a hmsk80 carb on a tech snowblower that I have had apart 5 times and cleaned it with ulrasonic cleaner and soaked it in carb cleaner put in a carb kit complete needle and seat float all that put it together and after a few min gas is running out of the throat. I have changed the float...

Our snowblower is an older model Arien, I'm unaware of the motor type because it is not the original. It has to be started using a jumper cable, and looks as if it has seen better days. My dad, the owner, has been taking good care of it, and it was working fine yesterday, but today, when he tried...

I have a toro snowblower I don't know what year it is sometime in the 90s and it won't start due to gummy gas so I need to take the carb off and clean it I never done this before and I was wondering how to take it off and where its located I appreciate it ? ...

Hi. I have a small Murray Ultra 5 HP, 22" snowblower. I have been a bad boy and have not taken care of it very well, no fuel stabilizer over summer, etc. The problem now, after about 3 years, is that when start, engine does not run smoothly, and will die under load. Also, looks like is firing at...