Ask Experts Questions for FREE Help !
Ask
    mistergfe's Avatar
    mistergfe Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2009, 02:35 PM
    How do I set the station on a Hardie HR-6100 irrigation system?
    The technical writer who composed the instruction manual didn't bother to tell how one sets the station before attempting manual watering. Can anybody tell me how to select the station?
    KUXJ's Avatar
    KUXJ Posts: 975, Reputation: 97
    Senior Member
    		  
    #2

    Jul 15, 2009, 11:29 PM
    Hi! mistergfe, and welcome to AMHD :)

    Is this the Guide that you have?https://www.lawngeniestore.com/Comer...ls/HR-6100.pdf

    It shows manual or semi-manual on the guides pg9 or PDF 6/7.

    K
    mistergfe's Avatar
    mistergfe Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 16, 2009, 01:36 PM
    Quote Originally Posted by KUXJ View Post
    Hi! mistergfe, and welcome to AMHD :)

    Is this the Guide that you have?https://www.lawngeniestore.com/Comer...ls/HR-6100.pdf

    It shows manual or semi-manual on the guides pg9 or PDF 6/7.

    k
    Yes, that's the manual, but it just says "TO TURN A STATION ON:
    1. Set the Function Dial to the desired station number."

    If you look at the graphic of the dials, you'll see that there is no "Station" option; however, I've since figured out that the six settings in the "Run Times" area on the right apply to the different watering stations. The tech writer didn't make that clear, but when I discovered there were six watering stations, I deduced that each setting must be linked to a station. (I'm not the owner of this house, and whoever hand-labeled the card inside the unit only listed three stations, not six, hence the confusion.) Thanks for taking the time to reply -- it helped a lot.
    KUXJ's Avatar
    KUXJ Posts: 975, Reputation: 97
    Senior Member
    		  
    #4

    Jul 16, 2009, 03:24 PM

    Your welcome, Glad to be of assistance... k
    carpenter999's Avatar
    carpenter999 Posts: 2, Reputation: 1
    New Member
    		  
    #5

    Sep 29, 2012, 11:48 AM
    Quote Originally Posted by KUXJ View Post
    Hi! Mistergfe, and welcome to AMHD :)

    Is this the Guide that you have?https://www.lawngeniestore.com/Comer...ls/HR-6100.pdf

    It shows manual or semi-manual on the guides pg9 or PDF 6/7.

    K
    Just trying to say thank you..
    GinaBobos's Avatar
    GinaBobos Posts: 1, Reputation: 1
    New Member
    		  
    #6

    Dec 18, 2013, 09:30 AM
    How do you turn off just one station? I have read the instruction manual and have done as it instructs to do --- but it absolutely won't turn off. I tried to set the watering time down to 1 minute (next best alternative) for that particular station, but that doesn't work either!! It will go down to 1 minute, then pops right back up to the original 10 minutes.
    Please help! I want to tear my hair out - this is SO maddening!! I have a new tree planted in the middle of this particular station and the nursery professional said to absolutely NOT let the sprinklers water the tree.
    Help!!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

James Hardie Irrigation system. [ 3 Answers ]

How do I set the irrigation system to run every other day.

James Hardie Irrigation Rain Dial [ 1 Answers ]

I have an RD-1200 Rain Dial that has a frozen display and controls. The display shows a time of 2 AM but it can't be changed and none of the other controls or programs respond. The Rain Dial is getting AC power and I put in a new 9 V battery but that hasn't done anything. Obviously my sprinklers...

Hardie Irrigation Rain Dial Sprinkler System [ 3 Answers ]

We recently bouht a house with this type of sprinkler system. The system was shut down before the winter and we are ready to get it running again. How do you get this system up and running after a winter shut down. Thanks for whatever help you can give.:)

Wiring for an Irrigation System [ 4 Answers ]

I have an irrigation system with an underground well, a tank, a pump start relay switch, a timer and a pressure switch set to turn on at 20 psi and off at 50 psi. There are 3 zone valves connected to the timer. There is a separate zone for hose bibs that is not connected to a valve or the timer,...

Irrigation System Problem [ 2 Answers ]

Five in-ground controllers (zones) handle my sprinkler system sprinklers. These controllers are in 5 different areas on my property. I noticed today that when zone one comes on that zone two comes on at the same time which never was the case in the past. As a consequence, the pressure is...

View more questions Search