 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Diaghram of Carb on Vanguard 21HP
Is there a "free" diagram online? I need to do a Carb Cleaning due to the "black-smoke" during heavy engine loading. I have read quite a bit here and I feel a good cleaning might solve my problem, but I do not have any "pictures" to guide me. I have torn down a few carbs, but this will be the first Vanguard I have done.
Thanks in advance. -Nivrat |
||||
|
||||
|
Hmm, I don't know of a free site. But the carbs. Are not that bad really, I suggest laying out something white, yes I said white, and disassemble the carb. Paying careful attention. Try and not have any distractions, nothing quite like being in a shop and dealing with 8 or 10 customers in between the beginning and reassembly of something new, but you can concentrate and do this. If there is a shop near you that you have a good report with they may print you a diagram off.
|
||||
|
||||
|
Thank you Sir!
I did find the Illustrated Parts Breakdown online last night. I have since printed it out for reference. The Carb does look to be straight forward, but I am used to working on Radars and I guess I have become dependent on schematics for re-assembly. Thanks for the reply and positive motivation... I really enjoyed reading this site. -Nivrat |
||||
|
||||
|
I got the carb off this weekend. I plan on beginning the tear-down this week. I'm just going to tear it down and clean the jets, floats, and air passages to be sure their isn't any dirt. I don't think I need a Carb Repair Kit with less than 90 hours on this motor. I will let you know how it turns out, hope to have it completed by this weekend.
Nivrat |
||||
|
||||
|
Good deal, be cautious of the gaskets. And also wear safety glasses while using the cleaners. And most carb. Cleaners will turn your skin as white as the background in this window. But after 500 to 600 it just seems like your skin is either burnt up, or used to the chemical, ha ha.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a simplicity mower (1998) with a 16hp vertical shaft vanguard v-twin engine (303777 1111-51). Yesterday, after running the mower with turbo bagger attachment (a little extra load on the engine), for about 20 minutes, I idled back the engine and it began belching large clouds of blue/white...
I am questioning whether it is allowed to withdraw 401K $$ by my employer plan with Vanguard. I called and was told that I would have to show proof of pending foreclosure before I could withdraw my 100% vested 401K $$. I see other people have been able to withdraw… with penalties of course. Why is...
Hello all, I have a this 16 HP Vanguard motor that came on a Dosko stump grinder. My problem is that the fuel will weep into the block and fill my cylinders. It also drips out of some sort of metal intake line that has nothing attached to it. This intake does suck air as it will kill the engine if...
Hi My 16HP B&S Vanguard V Twin won't start. There was a thing with wires at the bottom of the carb, but when removing the carb to check for a blockage, the wire snapped off. However, this does not seem to prevent the float chamber filling with fuel. There is fuel being pumbed from the fuel pump...
Briggs Vanguard, 15 hp OHV Model 280777 Type 0112.01 Code 94121154A Simplicity Brood Moor... The oil was checked and gas was checked prior to starting, the mower had been sitting for 4 to 6 weeks due to cold weather. I decided to started it and ran it at normal start speed until It warmed up....
View more questions Search
|
