Ask Experts Questions for FREE Help !
Ask
    mom22's Avatar
    mom22 Posts: 45, Reputation: 4
    Junior Member
    		  
    #1

    Jun 18, 2008, 08:43 AM
    Removing Old Veneer From Cedar Chest
    Anyone know the best way to remove an old veneer from a cedar chest? I've been chipping away at it but have gouged the cedar underneath a few times and don't want to do it again.
    Thanks.
    wildandblue's Avatar
    wildandblue Posts: 663, Reputation: 57
    Senior Member
    		  
    #2

    Jun 18, 2008, 08:49 AM
    Try sanding off the old finish. If it's a clear varnish you could just sand it a little to roughen it up then apply a second coat of varnish right over it to smooth it out without taking off the first
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #3

    Jun 21, 2008, 03:08 AM
    You are asking about removing the wood veneer and not the actual finish, correct?

    If you are trying to remove veneer, then I would suggest a rag that has been soaked in water, squeezing off the dripping water from it, and then applying the wet rag and a hot iron on the wet rag in order to loosen the glue of the veneer. You could then work quickly (before the glue sets again) with a large putty knife or chisel in order to remove the veneer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing chest hair [ 2 Answers ]

Hi I am a 25 year old guy... want to know the best way to remove chest hair.. don't want to use any razor... any hair removal cream useful.. please tell me

Refinishing cedar hope chest & pine table [ 1 Answers ]

I've just joined the Ask Me forum because of a plumbing problem. In exploring the site I've found that I "need" to ask the experts here about some of my own furniture questions. Several years ago I rec'd an old hope chest that seems to be made entirely of cedar. (The wood looks like the...

Removing veneer [ 1 Answers ]

I have an old bureau which has several areas where the veneer is peeling off and missing - can I remove it all as it is past fixing and if so how do I take it off and how should I treat the wood underneath thank you

Natural stone veneer [ 4 Answers ]

I'm planning to build a split face granite stone wall around my garage. Can anyone give me the ratio (shovels of sand, cement and/or mortar) to add for the mix. It's been years since I laid up a stone wall and don't remember it for sure. Also, any tips on cracking a stone, such as how to read the...

Veneer [ 2 Answers ]

I have found an old trundle sewing machine. The veneer has been water damaged and is going to have to be replaced. I want to know specifically how to put veneer down, how to cut it so it fits exactly, how to glue it and anything else I need to know. pollyscrab

View more questions Search