Search:
Type: Posts; User: kidolph
Search:
Search took 0.00 seconds.
-
Ellie
Remove the old material. It should be silicone. If the joint is tight you may need a razor blade to get it out. Use a tooth brush to clean with alcohol. When that has evaporated apply...
-
Corian is a mixture of natural mineral (ATH) and acrylic resin. It would be inappropriate to usa a polyester to repair it.
If you have a crack you will find a solution here:
...
-
I would contact a counter top fabricator. They will have the specialized tools and the expertise to do the best job.
-
Officially, from DuPont, there is no repair. However, This works very well:
https://sites.google.com/site/coriartinc/Home/price-list/simple-permanent-crack-repair
As to the cause: The cracks...
-
You should check out the website:
http://sites.google.com/site/coriartinc/
That should give you the information you need.
-
Yes, that is the recommended method.
If you are asking this because you believe that these scabs will interfere with the substrate you are putting Corian on, the answer is that it is also...
-
This system has been working well for over 16 years.
You can do it yourself. You must call to order.
http://sites.google.com/site/coriartinc/Home/price-list/simple-permanent-crack-repair
I...
-
Harold is right .
If you find that it is not the same as you sand it is not Corian.
As to cutting out the sink. A router would be a better tool to use as the corners need to be radiused. It...
-
It would be interesting to what caused it.
Does it appear larger at times and almost disappear at others?
A picture may help us to understand your problem,
You may want to read Simple...
-
bshowto,
I agree with Harold. The replacement of the sink alone is done. Some fabricators will do it in your home. The cost will be about $1,500.00. Call DuPont at 1-800-426-7426 for repair...
-
Go to Seaming Corian® - art specialties international, inc. You should find all of the information you need there. They will also answer any questions you may have.
-
You can sand out minor scratches with 220 grit sandpaper. Hand sanding recommended. Use light pressure and a firm sanding block. Then sand area with 400 grit to bring it back to normal sheen. ...
-
You will want to look at:
https://sites.google.com/site/coriartinc/Home/price-list/simple-permanent-crack-repair
I hope this helps
-
Complete instructions for the homeowner are here:
https://sites.google.com/site/coriartinc/Home/seaming-corian
I hope this helps
-
Check out the instructions:
http://sites.google.com/site/coriartinc/Home/price-list/simple-permanent-crack-repair
You can get it from them.
-
dcounty
Check out this thread. All of the information is there.
https://www.askmehelpdesk.com/interior-home-improvement/how-do-cut-already-installed-corian-without-removing-603935.html
Ken
-
You may find this web page helpful. It was written with the reuse of Corian tops in mind.
Seaming Corian® - art specialties international, inc.
I hope this helps.
-
Gene
First support the piece to be removed so that it does not crack as you finish the cut.
You can cut back to about 3" from the back splash with a circular saw. Corian is no harder than rock...
-
Craballey,
You could try this: Simple Permanent Crack Repair - art specialties international, inc.
You can always replace the sink if it does not work.
Ken
-
Irony
Is this an undermount sink? Undermount sinks and 1/2" Corian are both rare in 22 year old motor homes. Your answer will help me answer your question.
Ken
-
I think that you will have to send a picture. There are many kinds of connections.
-
Milo
You can repair it yourself.
Read:
Simple Permanent Crack Repair - art specialties international, inc.
I hope this helps
Ken
-
Use the wood blade on this tool.
YouTube - Harbor Freight Tools Multifunction Power Tool
Just cut slow.
-
Pattyg2,
The duPont piece seems a little confusing though accurate. It has a lot of options.
The eHow piece is badly written. The author never completes a thought. It is also quite wrong.
-
There are a lot of unknowns here.
What grit did you use. Very fine does not define it.
Another unknown is what your luster was. This is tough to tell verbally.
Typically a satin finish...
-
If the cracks are less than 3 sheets of paper wide, they are quite easy to fix. Go to Discover Corian® (art specialties international, inc.)
There is a page there for ease crack repair for...
-
Thanks KBC
Our new website has the complete instructions on it now.
Discover Corian® (art specialties international, inc.)
I hope this helps
-
First of all, know that it is just on the surface. Corian is non porous so the stain is not imbeded. First I would use a product like CLR or Lime Away. These are mild acids which disolve lime...
-
I am sorry about the mis tying. It was the engine that you would turn a few degrees. This can be done by pulling on the fan belt with the ignition off. If you have a standard transmission, you...
-
It sounds like your ring gear on the fly wheel.
With the key off, turn thr rngin by hand a few degrees and it will probably start. If it starts, one or more teeth are broken off the ring gear. ...
-
Professionals will not repair a sink. They have been told that it is impossible and the repair is not worth their time.
You can repair it yourself. Art Specialties International, Inc. ...
-
Hk
I did not taki it badly. I just feel stupid for my arrogance.
Thanks
-
hkstroud
Thanks for pointing out what a dumbass thai I must be. I had thought that I had seen tham all. The overflows that I have seen have all been made of Corian. This looks that some...
-
I agree with hkstroud, about the silicone.
The sink however is not Corian. It may be Solid surface. And the top is Corian but duPont never made sinks this way.
Ken
-
Retiredguy,
I am not familiar with Daps Qwik Seal Plus, but if it is not 100% silicone I would not use it.
Clean out all of the old material. Then apply the new, with the tip 90 degrees to the...
-
I am sorry that I did not get here sooner.
I dissagree. While a proffessional job may be better, it will take several hours. Properly done it will be over 2 days. The cost is usually around...
-
In addition to what has been said, a green Scotch Brite pad or some soft scrub should take almost any "stain" out of Corian. A true stain is something absorbed into the material and this usually...
-
brynleigh
First call duPont at 1-800-426-7426 (1-800-4CORIAN) and ask to have a waranty inspection. If the sink is Corian and faulty they will have it replaced. It has a 10 year waranty against...
-
Banjo3
I know that duPont does not authorize any method of repairing a Corian sink.
However we have supplied a kit for doing just this for 15 years. Hundreds of people have used it and had...
-
Two more things:
1 Make sure that yousand the cut as smooth as the top. This will eliminate any "stress risers".
2 Apply some metallic tape to the edge of the hole all the way around. ...
-
Do not be tempted to make a sharp inside corner as that will be a stress riser. That is a place where a crack may start. Allow about a 1/4" radius.
Go slow and take a little off at a time. You...
-
There should be no clear coat on a Corian countertop.
Perhaps you have another product.
For repair materials and instructions call Art Specialties International at 1-800-724-4008
I hope this...
-
Kingerna,
You have had good answers but I always recommend cutting at no faster than 60 Inches per minute. Your cut will be much better and it will cut down on the dust.
I hope this helps
Ken
-
maggieb45t
Yes they can be repaired.
Call Art Specialties International at 1-800-724-4008. Costs about $30.00
I hope this helps
Ken
-
The corner of the notch should not be left square. This be a place for a crack to start. You should always raidus thi insid corners.
I am sure that you have done this job already. But for...
-
Texas Coffee
I am sorry that I have not been checking this forum lately.
A steel spade bit will work fine. Just take your time and allow the shavings to clear regularly.
I hope this helps...
-
If it is Corian it did not yellow. The closest color in Corian that I can think of is Olive Mist. This color was discontinued about 1991. It had a few olive veins in a off white back ground. ...
-
A good quality automotive paint will coat Corian very well. It has a similar chemical make up Acrylic. It is just like putting on another layer of paint on a car.
I hope this helps
Ken
-
There is an easy system to repair simple cracks in Corian.
Call Art Specialties International, Inc. at 1-800-724-4008. Describe your sitation and they can help you.
I hope this helps
-
You can get the duPont joint adhesive at the following link
http://wwwcoriartspecialties.com
They will also advise youon the best installation techniques.
I hope this helps
|