Add your answer here.
Check out some similar questions!
Cause of flaking and pitting of new concrete [ 1 Answers ]
We had new concrete installed about 8 weeks ago. It was installed at the end of November, beginning of December. It was getting cold and I voiced my concern to our contractor. The subcontractor installed our garage footings, floor and a large section in front of the garage which is NOT flaking...
How do I lay concrete over concrete to avoid chipping, flaking and cracking? [ 4 Answers ]
I am considering overlaying concrete over concrete in the basement. How can I best do this to avoid problems with it in the future. I plan on coloring the cement before I say or staining it once it has been overlayed. I want to do it right the first time. Thx
Paint or stain 18 year old pressure treated deck [ 4 Answers ]
My summer home is on a lake in northern Michigan. We have hot summers and cold and deep snow in the winter, this is very hard on my deck. I have used a number of products to stain/seal the deck but the older is gets the harder it is to keep a nice look to the wood. I am considering paint or a...
Paint Remove from concrete [ 4 Answers ]
Two years ago I painted by porch and wall way which are concrete. I was told by the dealer that this was paint specifically for concrete. However, within a year the paint began to peal. My question is twofold: 1. How do I remove the paint? 2. Is the a special paint for painting...
How do I remove paint from a deck? [ 0 Answers ]
I power washed, and removed 90% of the paint from our deck, then we sanded it to smooth it out... Unfortunately not all the paint was removed even with that whole process. There appears to be some paint that is in grooves and some on the boards that are just a little warped and the sander can't...
View more Exterior Home Improvement questions Search