hunter thermostat 44110

torijune · #1 Mar 19, 2007, 11:31 AM

I have hot water baseboard heat, and installed the hunter digital thermostat 44110, and followed the directions as directed, I had had wires W, Y and RH, I marked and installed
each of the wires, and put them where they were marked on the thermostat.

I felt well and all of the lights ( temp, time, etc) lit up and Iwas happy. UNTIL two hours later when I found the heat unusually high, 78 degrees, I checked the pre-set and it showed 68 degrees, and I did all I could to circumvent the problem, but to no avail, so I re-installed the origonal thermostat, I would appreciate any advice as to how to use this thermostat (Hunter).

Thank you
Vicki Hunt

ballengerb1 · Mar 19, 2007, 11:48 AM

Here is the manual, did you follow the directions on page 4? www.hunter-thermostats.com/manuals/44110.pdf In some situations a jumper must be installed between Rh and Rc. This thermo should work with your basebpard system.

CaptainRich · May 29, 2007, 07:02 PM

You owe it to yourself to contact Hunter.com I had what I thought was problem and it turned out to be simply the wrong model. I now have the correct model for my application and I love it.



At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to: Get free answers from experts in any of our 300+ topics. Accept money for answers that you provide. Communicate privately with other members (PM). See fewer ads. Sign Up!