Ask Experts Questions for FREE Help !
Ask
    degroatm's Avatar
    degroatm Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 27, 2007, 11:09 AM
    Wiring pool pump motor
    I have a new pool pump motor. When I disconnected the old motor, I found it was wired with two blue wires and a green ground. The new motor has only L1 nad L2 connections.
    How do I tell the difference?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jul 27, 2007, 12:39 PM
    The 2 blue wires go to Line 1 and Line 2, the green should connect to green screw.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Condenser Fan Motor Wiring for Goodman AC Heat Pump 3 Ton [ 5 Answers ]

Condenser Fan Motor Wiring for Goodman 3 Ton -------------------------------------------------------------------------------- Hello Everyone, I have a GOODMAN A/C Heat Pump Model# CPLE 36-1 installed 3 years ago. Last week I turned the unit on, the compressor hums (not run)about 3-5...

Pool pump wiring [ 1 Answers ]

My electrician made a 4' mistake in running a new line to our pool. Instead of going to all the trouble of running a new line I would like to just replace the plug wire coming from the pump. I don't know squat about this. What does SJTOW mean?

Wiring a pool pump and switch [ 1 Answers ]

I am trying to wire a new switch to my pool pump it is a 230 volt. I have a new switch( 240v 30amp double pole single throw), but I do not know how to connect the wires. I have a red a white and a black wire and a bare wire. The is no designation on the switch as to where which wire should go...

Wiring Timer Clock, Off /On switch to Pool Pump [ 3 Answers ]

I recently replaced an underground electrical line for my pool pump. Now I'm not certain of the hookup from the main power (220)to the timer clock (also 220)into the manual off/on switch mounted in it's own box on the back of the timer box, to the pump motor. Can anyone help me here. It's a single...

Pool pump motor [ 0 Answers ]

Our pool pump motor plug has been replaced twice because when you try to plug it in it sometimes sparks and other times gets so hot it fusses to the outlet. Is this cord not grounded inside motor? Or any other suggestions? The pool is inground the pump brand is Lomart 1 hp & the motor is a baldor...


View more questions Search