I'm installing a ceiling fan in a bedroom and theintructions say to attach black to black and whiteto whita wires. The problem is there is no black wire on the fan motor. There is a red, blue, whte and brown wires. Which one do I use instead of the black wire?

The yellow covered remote control receiver in the fan box is simply too big to fit in the decorative mounting bracket cover. The directions mention a receiver mounting bracket, that was not there, and wouldn't have fit inside either. Anyone had to deal with this yet? Instructions attached. Jim

I have a hampton Bay Ceiling Fan, they switch for the fan has broken. I am trying to replace the fan switch, and not sure what color wires go into the spaces on the new switch. I have a black wire, purple wire, orange wire and a yellow wire. The spaces on the new switch are labeled L. 1,2,3. ...

I am trying to install a Hampton Bay receiver in an existing ceiling fan, model unknown. I have three wires coming out of the ceiling: black, white and red. These are connected to the fan wires: black to black, white to white and red to blue. The receiver only has two input wires: black and...

I have a Hunter fan with a remote that is a discontinued model. The light only stays on for awhile and then shuts off but the Fan works fine. The Hunter help line said that the receiver was probably bad but no replacement is available but could sell me a new fan at a steep discount. Why can't I buy...