- I have an old (1970) in-floor 220 volt finned, Taylor company, electric radiant heater. The 1 ft cord between two of the power units to the fins cracked and shorted out the circuit. Cord is only marked HPN. I believe it is 16/2 rated for 220 volts and 2000 or 2400 watts. I say that because that...

I need to wire a 220 volt intermatic timer with 3 15 amp loads but have lost the instructions .Can someone give me a diagram and instruction?

I need to install a 220 volt dryer oulet in my home, none present now (gas only). Slab foundation / attic accesible / walls must remain intact. I am trying to get a ballpark figure on the cost of installation. Thanks for any help you can give me.

Please tell me what gauge wiring {for example 12/2 or 12/3} and breaker amperage {for example 30 amp 2 pole} I need for a 220 volt wall heater.:confused:

I have a Dayton 1/3 H.P. motor Model no. 4M099C. It is a 220-230 volt motor. There are four wires coming from the motor. The purple is marked common, the black marked high, the blue marked med. And the red marked low. I want to connect these to run on 220. How do I go about connecting common and...