Add your answer here.
Check out some similar questions!
Bonding bushings and ground wire raceway [ 7 Answers ]
1. From the meter base, I have a 3" long galvanized nipple (2" wide in diameter) leading to and external main disconnect. The nipple carries 3 2/0 copper wires (2 hots and one neutral) to the disconnect. From the disconnect, I have 2" diameter galvanized conduit running into the house to the...
Maximum percent of cross sectional area fill when instalig 2 conductors in a raceway [ 2 Answers ]
The maximum percent of cross sectional area fill when installing more than 2 conductors in a raceway is
How long does flexible adhesive take to dry for ceramic tiles on a flexible floor [ 2 Answers ]
I have laid ceramic tiles on a flexible floor using the appropriate adhesive. Professionally laid (apparently) My question is, how long should I let set/dry before moving large heavy items such as dishwasher/washer back on to the tiles?
Can I install a 600 volt single phase circuit in a underfloor concrete raceway with l [ 1 Answers ]
Will the 2008 NEC allow me to install a 600 volt single phase circuit in an underfloor concrete raceway that also has lower voltage control cables if a plastic divider separates the higher voltage wires from the control cables?
Can I replace a 240v plug/cord with a 110v plug/cord on a KitchenAid Mixer (5KMP50)? [ 5 Answers ]
I have acquired a KitchenAid Heavy Duty 5-quart 10-speed Mixer model #5KPM50, which has a European-style 240v plug. I know there are converters available, but I want to replace the 240v plug with the standard 110v plug used in the USA. Can I replace just the plug or should I replace the plug and...
View more Electrical & Lighting questions Search