Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Testing for amps in an outlet
[ 2 Answers ]
What setting do I use on my multimeter to test for the number of amps available in an outlet. For example, I want to see if a kitchen plug is split with 15 amps up and 15 amps down. Thanks, Erik
What is the correct way to measure for 220v on a multimeter at a wall outlet?
[ 22 Answers ]
I am trying to install a tankless 220v hot water heater in my kitchen. There is a 220v outlet on the backsplash of the counter that was there when I moved in and have never used. I plan to use this as a 220v source. When I put the meter to the bare copper ground and 1 wire on the outlet I read...
Testing 220v outlet
[ 3 Answers ]
Hello! I have a 4 wire outlet in the garage which is used for a generator. Wire colors are Black, Red, White, and a Copper wire wrapped in paper. All the wiring is contained in a metal conduit. I just purchased a heater for the garage and it had a 3 wire plug. I disconnected the conduit,...
Testing an electrical outlet
[ 13 Answers ]
When testing an electrical outlet with a circuit tester and all three lights come on, what does that mean and how do correct it? Thanks, Mike
Electrical outlet rating vs. Circuit breaker amperage rating
[ 5 Answers ]
Hello to all, I am new to this forum, please excuse me if this question has been answered. I just bought a Thermal Dynamics Plasma cutter. It has a Nema 50-P plug end on it, which I assume is to be plugged into a Nema 50-R outlet. In looking in my reference book, this is a 3 wire... View more questions Search
|