What is service entrance size for 300a-copper only

mike42265 Posts: 1, Reputation: 1

New Member

Jun 26, 2013, 03:00 PM

What is service entrance size for 300a-copper only

What is copper wire size for 300a service entrance?

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Jun 26, 2013, 05:27 PM

For what type of installation?

Add your answer here.

Check out some similar questions!

Service entrance wire size [ 1 Answers ]

A 3-family house using three 100 amps sub-panels... what size of cables should be used for this service and how do you design this service ?

Service entrance cable (alum) size for a 100 amp service at 186 feet for a garage [ 1 Answers ]

The garage is 186' from the service at the house. I wanted to make sure the voltage drop would not cause a problem.

Size of Service Entrance Wire [ 0 Answers ]

Hello I will be installing a new electrical service. It will be a 5 ganged meter socket running 4 apartment panels and 1 landlord panel. Each apartment will have a draw of between 60-67amps and will be on 100Amp panels. The landlord panel will draw between 56-62 amps and will also be on a 100...

Service entrance wire size [ 1 Answers ]

What size wire is required for a 200 Amp service panel?

Service entrance wire size. [ 8 Answers ]

I am in Honduras, where, the NEC does not apply, and what a mess we have without it.. I can put any size wire anywhere, and no one cares, except me. I am putting in a 150 Amp Service and the breaker panel will be about 50 Ft from the Meter.. I have not yet figured the size wire I need to the...