Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Red wire in ceiling junction box?
[ 1 Answers ]
Trying to replace light in ceiling. In the junction box there are two white, three black wires, 1 red and the ground. Hooked up whites to whites, blacks to blacks, and capped off red. Light worked but won't switch off. Then connected red to the blacks and it keeps throwing the breaker. What am I...
Can I cap off white junction box wire
[ 1 Answers ]
I have an older chandelier with 2 unlabeled wire (a single double wire which has been split in two.) The junction box has a black, white, and red wire in addition to a copper wire. I attached the copper wire to the green screw, but I was not the one who removed the previous chandelier and do not...
No red wire in junction box
[ 3 Answers ]
Installing a timer forutside light. Box only has white, black, green. I know black to black white to white; but timer also has a red wire; I have no red wire in box. What do I connect the red wire from timer to? Right now I just capped it off, but on manual I cannot turn the light on
How do I splice #6 wire in a junction box?
[ 5 Answers ]
How do I splice #6 wire in a junction box ?
Junction box for #2 aluminum wire
[ 3 Answers ]
I need to join a new 100A feed on #2 aluminum wire to an existing #2 wire running from the panel. So this is actually #2 alum triplex in both cases plus a #8 bare copper ground. The junction will take place in an access panel in the wall where the two PVC conduits meet. What size junction box do... View more questions Search
|