Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hook up my generator from 4 prong to 3 pron using 3 wire 12 gauge extension cord
[ 12 Answers ]
I have a Husky 3750 watt generator. I want to make my own cord with 4 prong head on one end and 3 prong on the other. I have already made the cord but am unsure of the way I have it wired. On the 4 prong side I wired it white to white, black to black, green to green, and jumper from black to X. On...
Wiring 220v 50 amp 50 feet wire?
[ 0 Answers ]
I want to move my hot tub. It is 220V and is wired currently with 2-6 gauge on leads, 10 gauge on ground and 12 gauge on neutral. Is this good?
3-wire 220V receptable and need to hook up a 4-wire 208V oven
[ 4 Answers ]
I have a Bakers Pride oven that has 4 wires and a 220v 3-wire receptable in which I need to hook it up. The receptable has black, white, & bare wires. The oven has black, red, white, and green. Do I simply hook up the black to black, the red(oven) to white(receptacle), and then the white and...
How doe you turn 3 wire 220v into 4 wire 220vShow diagram
[ 1 Answers ]
I have 3 (2black 1 bare) wire 220 coming out of my kitchen. How do I convert it to 4 wire for my new stove? Or do I have to run a new line from my panel?
Unsure how to splice 4 wire 220v to 3 wire 220v
[ 1 Answers ]
OK I trying to get 220v in my garage from my unused dryer outlet it has 4 wires feeding into it 1 bare 1 neutral 2 hot I was going to buy some 10/3 and splice it and run it the 50 ft I need to get to garage for a air compressor now 2 things it only reads 230v at box is that sufficient to travel... View more questions Search
|